Crack Injection

As concrete cures, it shrinks and small cracks can develop as a result. They can also develop due to slight movement in the foundation. Our repairs eliminate water infiltration through these cracks.

Epoxy Crack Injection Service since 1977

Crack injection is a process by which resin or grout (epoxy or polyurethane) is injected into a crack or void under high or low pressure.  Polyurethane is flexible and is used to stop water leaks, while epoxy is a glue used to bond sections of a wall back together as a structural repair. 

Epoxy injection is similar to chemical welding cracks of poured concrete. Epoxy injection performed by our company can fill the entire crack or void. A surface seal is applied over the cracks which converts a crack into a tunnel. Our machinery can fill the tunnel completely.

Epoxy injection resin is up to three times stronger than regular concrete.

Don't be misled by other injection methods. Epoxy pressure grouting cracks with caulk or grease guns, through injection or grease zerks, is inferior to our methods and machinery.

• Our system works. We work fast, and our methods can save you thousands. You will have competent trained professionals on the job. No other process can repair fissures in concrete down to .002 inches wide and up to 40 feet deep - dry, wet, or cold. Our process of structural concrete repair bonds the entire crack network. Stresses are once more distributed evenly throughout the structure. It repairs cracks caused by shrinkage, mechanical overload, temperature changes, settlement, and human error. You will be receiving products that meet rigid quality control standards.

• There is no drilling or jack hammering. The process is simple, clean, and the materials we use are safe and non-polluting.

| © 2004 Associated Construction Services |All Rights Reserved | 616-235-2432 |